Clean & Charge; Wall Holder - Braun 7680 Instructions Manual

18
B Clean&Charge
Braun Clean&Charge has been developed for cleaning,
charging and storing your shaver. Clean your shaver daily
in the Clean&Charge.
During the automated cleaning process, the shaver is
switched on and off at intervals to obtain best cleaning
results. Since the specially formulated cleaning fluid
contains a small amount of oil, the cleaning procedure also
fulfills the lubrication needs of the shaver.
Important
• Only use the low voltage adaptation system supplied with
the shaver.
• In order to avoid any leakage of the cleaning fluid, place
the appliance on a flat, stable surface or use the wall
holder (not included in all versions). Do not tip, move
suddenly or transport in any way if a cleaning cartridge is
installed.
• Do not place the appliance in a mirror cabinet, nor store it
over radiators, nor place it on polished or laquered
surfaces. Do not expose to direct sunlight.
• The appliance contains highly flammable liquid.
Keep it away from sources of ignition. No smoking.
Keep out of reach of children. Do not refill cartridge.
Use only original Braun refill cartridge.
• When cleaning the shaver, its protection cap should be
removed.
Description
12 Lift button for cartridge exchange
13 Contact bow
14 Release button
15 Operation mode selector
16 «clean» light: cleaning process indicator
17 «charge» light:
charging process indicator
18 «cartridge» light: cartridge replacement indicator
19 Cleaning cartridge
Wall holder (not included in all versions)
Mount the wall holder with plugs and screws to a smooth
wall so that the standing surface for the Clean&Charge is
horizontal.