Table of Contents
Advertisement
A Shaver
Our products are designed to meet the highest standards
of quality, functionality and design. We hope you enjoy
your new Braun shaver. Your Braun Syncro is supplied
with a Braun Clean&Charge (please see section B).
SmartLogic Inside
The «SmartLogic» electronics inside your shaver analyzes
your personal shaving patterns and the type of beard you
have, and then adapts the battery care and cleaning
cycles to ensure optimal performance.
Warning
Your shaver is provided with a low voltage adaptation
system. Therefore you must not exchange or manipulate
any part of it. Otherwise there is risk of electric shock.
Technical specifications:
• Wattage via low voltage cord: 7 W
• Power supply via mains adapter, input voltage:
100-240 V 2/50 or 60 Hz (automatic adaptation)
• Shaver input voltage: 12 V
Description
1 Foil protection cap
2 Shaver foil
3 Cutter block
4 Foil release button
5 Long hair trimmer
6 Switch
Charging the shaver
• First charging: Using the power supply cord set, connect
the shaver to the mains with the switch in position «0» and
charge it for at least 4 hours (plug might get warm). From
now on, the SmartLogic inside your shaver will ensure
optimal care of the battery.
• A full charge will give up to 50 minutes of cordless
shaving time depending on your beard growth.
However, the maximum battery capacity will only be
reached after several charging/discharging cycles.
• Best environmental temperature range for charging is
15 °C to 35 °C.
7 Display
8 Info key
9 Pilot light
10 Shaver socket
11 Power supply cord set
English
+35°C
+15°C
13
Hide quick links:
Advertisement
Table of Contents
