How To Start; How To Clean - Braun Wet&Dry 70-B7850cc Manual

Keep power supply, charging stand and
cleaning station dry.
This appliance is provided with
a Safety Extra Low Voltage
plug-in power supply. To avoid
risk of electric shock, do not
exchange or tamper with any
part of it. Only use Braun
power supply type
Do not use if the appliance or any attachment
is damaged. Do not open the appliance!
The built-in rechargeable bat-
teries can only be replaced by
an authorized Braun Service
center.
This appliance can be used by
children aged from 8 years
and persons with reduced
physical, sensory or mental
capabilities or lack of experi-
ence and knowledge if they
have been given supervision
or instruction concerning use
of the appliance in a safe way
and understand the hazards
involved.
If the appliance is provided
with a hair clipping attach-
ment, it can be used for hair
clipping purpose by children
aged from 3 years under
supervision.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be
20
made by children without
supervision.
Caution
Recommended ambient temperature for
charging is 5 °C to 35 °C, for storage and
shaving it is 15 °C to 35 °C.
Do not expose the appliance to temperatures
higher than 50 °C for extended periods of time.
.
The brush (03-BR) must not be used on dam-
492
aged or irritated skin or on wounds.
If skin irritation occurs, discontinue use.
Avoid direct contact with eyes and hairline.
The body trimmer (06-BDT) must only be
used with comb attachment in delicate areas.
Only use the appliance for its intended pur-
pose. For hygienic reasons, do not share this
appliance with other persons.

How to start

For initial activation connect the shaver to an
electrical outlet. Afterwards unplug for usage.
How to shave
Position the shaver head at 90° angle to your
skin that all shaving elements have full skin
contact.
Shave against the direction of your beard
growth in straight back and forth movements.

How to clean

The foil & cutter cassette needs cleaning under
hot running water after each foam or gel
usage! The brush (03-BR) needs to be cleaned
under cool running water after each usage!
Switch the shaver on and rinse until all resi-
dues have been removed.
Afterwards the shaver with foil & cutter cassette
attached can be cleaned in the cleaning
station.
Product contains batteries and / or
recyclable electric waste. For
environment protection, do not
dispose of in household waste,