Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION ABOUT
A self contained LP-gas cylinder for use with this appliance must have a
capacity of 20 lbs. and must be equipped with a Type 1 connector and an OPD
(overfill protection device). See Figure 1.
The LP-gas supply cylinder to be used must be constructed and marked in
accordance with the specification for LP-gas cylinders of the U.S. Department
of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339,
Cylinder, Sphere and Tubes for the Transportation of Dangerous Goods.
The cylinder supply system must be arranged for vapor withdrawal.
The cylinder used must include a collar to protect the cylinder valve.
This appliance shall be used only outdoors in a well-ventilated space and
shall not be used in a building, garage or any other enclosed space.
When this appliance is not is use, the gas must be turned off at the supply
cylinder.
Storage of this appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance.
Cylinders must be stored outdoors in a well-ventilated area out of the
reach of children .Disconnected cylinders must have threaded valve plugs
tightly installed and must not be stored in a building, garage or any other
enclosed areas.
CSA (Canadian Standards Association) certified to ANSI Z21.97•CSA
2.41-2012 " Outdoor Decorative Gas Appliances"
INPUT
Propane Regulator Pressure
Natural Gas Minimum Inlet
Pressure
Clearances to combustible
surfaces
PROPANE (LP) GAS
Figure 1
SPECIFICATIONS
30,000 Btu/hr
11 in / 2.74 kPa water column
7 in / 1.74 kPa water column
Sides 24 in / 60.96 cm
4
20,000 Btu/hr Low fire
Top: 72 in / 182.88 cm
Hide quick links:
Advertisement
Table of Contents
