Basic Cleaning; Cleaning The Sprayhead Tube - Bunn Speed Brew Owner's Manual

Table of Contents

Advertisement

BASIC CLEANING

Wash Brew Funnel and glass Carafe after each use.
If you have a dishwasher, go that route.
Important: separate Carafe Lid from Carafe to place
in dishwasher, using top shelf only for both glass
and Lid. If you go the wash-by-hand route, use a
mild, non-abrasive dish soap. Be sure to use edge
of sponge or corner of dish towel to clean every
nook and cranny.
Wipe the outside of the brewer occasionally,
including area above the Brew Funnel.
If you're a neat freak, do it more than occasionally.
18

CLEANING THE SPRAYHEAD TUBE

Cleaning the Sprayhead Tube removes deposits due to
natural mineral content in your water. The more mineral
content in your water, the more you should clean.
A good rule of thumb is to do it every 3 months,
unless you have very hard water then twice a month
may be necessary.
You'll need: metal Deliming Tool provided with your
machine, toothpick, dish soap, soft cloth.
Flip the Tank Switch to the OFF position, unplug
brewer and allow to cool for at least 2 hours.
Remove funnel and unscrew Sprayhead.
Insert all but 2 inches of the Deliming Tool into
Sprayhead Tube.
Slide Deliming Tool in and out of Sprayhead Tube 5-6
times to loosen any deposits.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents