Bunn Speed Brew Owner's Manual page 9

1. SLIDE EMPTY BREW FUNNEL
INTO BREWER
2. FILL CARAFE WITH COLD WATER
• Pour water into brewer.
• Position Carafe on
Warmer Plate.
• Close Lid.
• Wait 4 minutes.
3. DO STEP 2 AGAIN
• Wait until water flows
into the Carafe.
• Then pour out water
in Carafe.
• Reposition Carafe on
Warmer Plate.
4. ALMOST READY
• Plug in the brewer.
5. TURN ON BREWER
• Press Tank Switch on side
to ON position.
• Wait 15 minutes for water to
heat (you only do this once for
life of brewer, so don't fret).
• Keep Tank Switch on
(unless you're taking that
much-needed vacation).
• Then be sensible and
shut it off.
9