Dodge 2016 Challenger Owner's Manual page 90

Hide thumbs Also See for 2016 Challenger:

Table of Contents

88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

strap. See the section "Installing Child Restraints

Using the Top Tether Anchorage" for directions to

attach a tether anchor.

9. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the belt

path. It should not move more than 1 inch (25.4 mm)

in any direction.

Any seat belt system will loosen with time, so check the

belt occasionally, and pull it tight if necessary.

Installing Child Restraints Using The Top Tether

Do not attach a tether strap for a rear-facing car seat

to any location in front of the car seat, including the

seat frame or a tether anchorage. Only attach the

tether strap of a rear-facing car seat to the tether

anchorage that is approved for that seating position,

located behind the top of the vehicle seat. See the

section "Lower Anchors and Tethers for CHildren

(LATCH) Restraint System" for the location of ap-

proved tether anchorages in your vehicle.

WARNING! (Continued)

Chapters

Table of Contents