Dodge 2016 Challenger Owner's Manual page 394

392 STARTING AND OPERATING
Manual Transmission — If Equipped
Vehicles with a manual transmission have an adjustable
launch RPM controlled through the Uconnect system.
Launch Control is only available when the following
procedure is followed:
1. Pushing the "LAUNCH" button on the center stack
switch bank.
NOTE: Pushing the SRT button on the center stack or
pressing the "Apps" button on the touchscreen are two
other options to access launch control features. Please
refer to "Uconnect Settings" within your Owner's
Manual on the DVD for further information.
2. Press the "Launch RPM Set-Up" button on the touch-
screen. This screen will allow you to adjust your
launch RPM's for optimum launch/traction.
3. Press the "Activate Launch Mode" button on the
touchscreen.
4. Make sure the vehicle is not moving.
5. Make sure the steering wheel is pointing straight.
6. Fully depress the clutch pedal and make sure the
vehicle is in first gear.
7. While holding the clutch depressed, rapidly apply the
accelerator pedal to wide open throttle. The engine
speed will hold at the pre-selected launch RPM. The
engine speed will hold at the RPM that was set in the
"Launch RPM Set-up" screen.
NOTE: Messages will appear in the Driver Information
Display (DID) to inform the driver if one or more of the
above conditions have not been met.
8. When conditions 4 through 7 have been met, the
Driver Information Display (DID) will read "Launch
Ready Release Clutch". Release the clutch quickly and