Dodge 2016 Challenger Owner's Manual page 277

• Set Time Minutes
This feature will allow you to adjust the minutes. The
"Sync time with GPS" button on the touchscreen must be
unchecked. To make your selection, press the "+" or "–"
buttons on the touchscreen to adjust the minutes up or
down.
• Time Format
This feature will allow you to select the time format
display setting. Press the "Time Format" button on the
touchscreen until a check-mark appears next to the 12hrs
or 24hrs setting, showing that setting has been selected.
• Show Time In Status Bar — If Equipped
This feature will allow you to turn on or shut off the
digital clock in the status bar. To change the Show Time
Status setting press the "Show Time in Status Bar" button
on the touchscreen until a check-mark appears next to
setting, indicating that the setting has been selected.
UNDERSTANDING YOUR INSTRUMENT PANEL 275
Safety & Driving Assistance
After pressing the "Safety & Driving Assistance" button on
the touchscreen the following settings will be available:
• Forward Collision Warning — If Equipped
The Front Collision Warning (FCW) feature provides an
audible and/or visual warning to potential forward
collisions. The feature can be can be set to Far, or set to
Near. The default status of FCW is the Far setting. This
means the system will warn you of a possible collision
with the vehicle in front of you when you are farther
away. This gives you the most reaction time. To change
the setting for more dynamic driving, select the Near
setting. This warns you of a possible collision when you
are much closer to the vehicle in front of you. To change
the FCW status, press and release the "Near" or "Far"
button. For further information, refer to "Adaptive
Cruise Control (ACC)" in "Understanding The Features
Of Your Vehicle".
4