Aux - Ipod - Victory 2012 Ness Signature Series Rider's Manual

AUX / iPod
Input Cable Setup
The AUX and iPod input cables are con-
nected to the audio system through a small
hole in the left console storage bin. Only
one input cable can be connected at any
given time.
To use the iPod, connect the iPod input
cable.
AUX Input
Cable
124
iPod Input
Cable
To change an input cable:
1. Open the left console storage bin.
2. Locate the input cable and sealing
grommet at the bottom of the bin.
3. Carefully pull the cable inside the bin.
4. Disconnect the cable from the harness
by carefully pushing up on the green
tab. DO NOT ALLOW THE HAR-
NESS TO DROP BACK THROUGH
THE HOLE.
5. Install the desired input cable.
6. Carefully push the sealing grommet
back into the hole.
AUX Input
Cable