Engine Air Cleaner/Filter (2.2L Engine) - Chevrolet 2010 Cobalt Owner's Manual

Hide thumbs Also See for 2010 Cobalt:
Table of Contents

Advertisement

6. Remove filter and inspect or replace.
Wipe all dust from inside of the housing and
inspect the air cleaner and air outlet duct for
cracks, cuts, and deterioration. The air outlet
duct must be replaced if damaged.
7. Reinstall the filter cover and latch the clamps.
8. Reattach the air outlet duct and tighten the screws
on the clamps that hold the duct in place.
9. Reconnect the air flow sensor electrical connector.
Engine Air Cleaner/Filter
(2.2L Engine)
See Engine Compartment Overview on page 6 14 for
the location of the engine air cleaner/filter.
When to Inspect the Engine Air
Cleaner/Filter
Inspect the air cleaner/filter at the Maintenance
intervals and replace it at the first oil change after
each 50,000 mile (80 000 km) interval. See Scheduled
Maintenance on page 7 3 for more information. If you
are driving in dusty/dirty conditions, inspect the filter at
each engine oil change.
I n f o r ma t i o n P r o v i d e d b y :
6-25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents