Planar m40L Installation Manual page 64

Color Balancing Multiple Displays
2
3
4
5
Note:
6
54
On each display, open the
>
OPTIONS BACKLIGHT SETTINGS
B ac kl ig ht Co n tr ol
A u to Bac kl ig h t on
Tu r n B ac kl i g ht of f w i t h n o S o u r c e ( D P M S )
D P MS D ela y
B ac kl ig ht Co n tr ol M o d e
B ac kl i g ht I n t en s i t y
A m bi en t T hr esh o ld
A m bi en t L ig h t
a Set
BACKLIGHT CONTROL MODE
B ac kli g ht C o n tr o l
A u to B ac kl ig h t on
Tu r n B ac kl i g ht o f f w i t h n o S o u r ce ( D P M S )
D P MS D ela y
B ac kli g ht C o n tr o l M o d e
B ac kli g ht I n te n sit y
b Set (or confirm)
BACKLIGHT INTENSITY
On each display, open the
If the array has never been color balanced, make sure you start with the
color temperature setting on each display. If you are not interested in achieving a
specific color temperature, use
been color balanced before, it will display
line, because the balance values don't match any of the pre-set color
temperatures.
On each display, highlight
menu displays
WHITE
Always use the internal Test Patterns for color balancing, not an external pattern.
When all displays are white, find the least bright display in the array. This will be
the "baseline" display, and you will not adjust it. All other displays will be adjusted
to this baseline display.
Why pick the "least bright" display? Why not pick the brightest and adjust to it?
When the white value is 100, the display is as bright as it can get. You are
adjusting for slight variations in backlight brightness.
m40L/m46L Installation Guide
BACKLIGHT CONTROL
).
1 h r
A u to
1 0
9 9L u x
2 39 L u x
to
MANUAL
1 h r
Ma nua l
1 0
to 10 (100%).
COLOR BALANCE
, which is the brightest. If the display has
NATIVE
CUSTOM
and use the left or right arrows until the
TEST PATTERN
.
menu ( >
MENU ADVANCED
.
menu.
in the
COLOR TEMPERATURE
NATIVE