Table of Contents
Advertisement
6.0 - TROUBLESHOOTING
Common issues can be fixed by following the instructions in this guide. If the unit will not function after
following these instructions, contact technical support before attempting to use or repair the product.
ISSUE
CAUSE
Faulty spark plug
Clogged fuel line
Engine will not
start
Wrong fuel type
Carburator not getting air or fuel
Dirty air filter
Starter not functioning
Dirty air filter
Power is low
Throttle lever unadjusted
Clogged strainer
Suction hose blocked with debris
Damaged hoses
Water output
is low
Clogged impeller
Lose hose clamps
Leaking seals
Incorrect pump placement
No water
output
Pump is not primed
Pump mechanism is damaged
ACTION
Use a wrench to remove the spark
plug and follow procedure for
cleaning or replacing
Check fuel line for leaks. Unclog if
necessary
Drain fuel and clean fuel line. Refill
with appropriate fuel
Take to service dealer
Clean air filter
Take to service dealer
Clean air filter
Slide throttle lever to increase
power output
Remove debris and rinse with water
Remove obstruction
Replace hoses
Remove obstruction
Tighten or replace hose clamps
Take to service dealer
Reposition pump (see placement
section of manual)
Prime pump
Take to service dealer
26
Advertisement
Table of Contents
