Table of Contents
Advertisement
3.0 - PRE-OPERATING PROCEDURE
Inspect all components for damage and to ensure that none are missing. If
you require a replacement, do not operate this tool until all parts are present
and in proper working order.
Do not modify or create accessories for this equipment. Using modified
components may result in damage and may void the warranty. Contact
customer service if you suspect that this equipment has been tampered with.
3.1 - Engine Oil Check
1. Ensure the Trash Pump is on a level surface.
2. Inspect engine oil:
•
Take out the dipstick and clean it with a dry towel.
• Check the oil level by reinserting the oil filler cap without rotating it.
Remove the oil filler cap and examine the oil level. If the oil level is at
or below the lower level, refill the oil to the upper limit mark. (10W30)
Reinsert the oil filler cap and tighten securely.
11
Advertisement
Table of Contents
