Duplicating A Video Tape - Memorex MVD4540 Owner's Manual

Duplicating a video tape

Duplicating a video tape
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
1
Load a blank cassette tape with the erase preven-
tion tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
2
Press SPEED to select the desired tape speed SP
or SLP.
It is recommended that you set the Speed to the
SP mode on the recording VCR for best results.
3
Press INPUT SELECT to select AUDIO/VIDEO
input position. "L" will appear in
the display.
Connection with second Video recorder
Playback VCR
To VIDEO OUT
AUDIO/VIDEO Cord (supplied)
To AUDIO (R) IN
To VIDEO IN
To AUDIO (L) IN
34
2A77001AE(34-39)
To AUDIO (R) OUT
To AUDIO (L) OUT
Recording VCR
34
4
Press REC/OTR on the recording VCR, then press
PAUSE/STILL.
5
Press PLAY on the playback VCR or CAMCORDER,
then press PAUSE/STILL.
6
Release the recording pause and the playback still
simultaneously to begin the duplicating process.
Connection with Video camera
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
AUDIO/VIDEO Cord (not supplied)
To VIDEO IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup
is shown above.
8/29/02, 10:55 AM
To AV Jack