Memorex MVD4540 Owner's Manual page 32

Timer-recording
Timer recording special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MO-SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At picture 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
When you press SET – repeatedly, the indicator at
DATE will change as follows, in this case the day is
Friday.
The current day (Friday)
One month later
minus one day
WKL-WE
(Weekly Wednesday)
DATE START END
WKL-WE
+/—/ENTER/CANCEL/MENU
In case Timer programs-overlap
•
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00
Program 1
Program 2
Program 3
Recording
Prog.1
Control Settings
NOTES:
•
The daily/weekly recording can be made continu-
ously until the recording is canceled or the tape
reaches the end.
•
During timer recording the automatic rewinding
mechanism does not function.
32
2A77001AE(28-33)
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-TH (Weekly Thursday)
CH
9 : 00
10 : 00 11 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
32
Confirmation / Cancellation of the Timer
recording
1
If the Timer has been activated, press TIMER REC
to deactivate the Timer. The clock symbol(
disappear. Then press VCR/DVD to change to
VCR mode.
2
To confirm Timer program:
At picture 1 on the
previous page select the
"TIMER REC SET" option
and press ENTER.
Then the timer program
list as right will appear on
the screen.
3
To cancel Timer program:
Press SET + or – to
select the unnecessary
program, then press
CANCEL to cancel the
program.
4
Press VCR MENU repeatedly until the TV-picture
appears.
NOTES:
• If there are other timer record programs remaining,
TIMER REC must be pressed to reactivate the timer,
otherwise the remaining timer record programs will be
ignored.
• You cannot confirm the Timer program during timer
recording operation.
• You can correct or cancel a programmed setting in
program confirm mode.
8/29/02, 11:00 AM
) will
DATE START END CH
26(SU) 11:00 11:30 125
PM PM SLP
+/—/ENTER/CANCEL/MENU
DATE START END CH
—
+/—/ENTER/CANCEL/MENU