Special Playback - Memorex MVD4540 Owner's Manual

Special playback

Picture Search
Reverse picture search function
Press REW x 1 or x 2 during the playback.
Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.
SPEED SEARCH TIMES
TAPE SPEED
PRESS ONCE
SP (Standard Play)
LP (Long Play)
SLP (Super Long Play)
Still Picture
Press PAUSE during playback. To resume normal
playback: Press PLAY.
Slow Motion
During playback press SLOW.
To return to playback: Press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRACKING + or – to reduce the noise bars.
If the still picture jitters excessively, press TRACKING
+ or – to stabilize the still picture.
Frame by Frame picture
Press PAUSE during playback.
Press SLOW repeatedly. The picture advances frame
by frame.
To return to playback: Press PLAY or PAUSE.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises sufficiently
during playback, press TRACKING +/– to eliminate the
noises.
"MANUAL TR." will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
•
Press ATR to reactivate automatic tracking again.
"AUTO TR." will appear.
NOTES:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
playback after approx. 5 minutes to protect the video
tape against excessive wear.
26
2A77001AE(22-27)
PICTURE SEARCH SPEED
PRESS TWICE
3 X 5 X
7 X 9 X
9 X 15 X
26
Repeat playback
The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning and
the playback will be repeated.
1
Press SETUP MENU. Press
AUTO REPEAT.
2
Then press ENTER to
select [ON] or [OFF].
If [ON] is selected, the
playback will be
repeated endlessly.
3
Press VCR MENU until the menu screen is
cleared.
if you press CALL, "
4
To start the playback, press PLAY.
The playback will be repeated endlessly.
To cancel repeat mode:
Follow the above step 1, then press ENTER to select
the OFF position. Press VCR MENU to return to the
TV.
8/29/02, 11:01 AM
or to select
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SET UP
SYSTEM SET UP
+/-/ENTER/MENU
" will appear on the screen.