Timer Recording - Memorex MVD4540 Owner's Manual

Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
POWER EJECT
1 2 3
4 5 6
TRACKING/
SET
—
SELECT/
ENTER
CH
SET UP/
DVD MENU
VCR MENU
ZOOM
AUDIO/ MEMORY/
AUDIO SELECT ZERO RETURN COUNTER RESET
SUB TITLE/
TIMER REC
ATR
NOTES:
• If the clock symbol(
timer recording ended, the TV program
has not been completely recorded
because of an insufficient tape supply.
Press TIMER REC to cancel the timer
program or press EJECT to remove
the cassette tape.
• During timer recording standby mode,
the VCR mode cannot be selected. To
use the VCR, press TIMER REC at
first, then press VCR/DVD to change
to VCR mode. After you use the VCR,
press TIMER REC again to put the VCR
into timer recording standby mode.
• If you press TIMER REC during timer
recording, the recording operation will
be interrupted. If you press TIMER
REC again within the programmed time,
the recording operation will start again.
•
After a power failure or disconnection
of the power plug, all programmed
recording settings and time display
will be lost upon resumption of power.
In this case, reset the clock (see page
21) and reprogram any timer
recordings.
2A77001AE(28-33)
Preparation:
Press VCR/DVD to select the VCR mode.
•
Load a cassette tape with the erase prevention tab intact.
Press the CALL button to verify that the time and date are
•
correct (see
Example: Program a timer recording for the 26th day, channel 125
OPEN/
CLOSE VCR/DVD
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).
1
DISPLAY/CALL
INPUT SELECT
TRACKING/
SET
+
2
CLEAR/
RETURN
CANCEL
3
TITLE REPEAT A-B
ANGLE/ CLOCK/
COUNTER
PLAY MODE/
TV/VCR
SPEED
4
) blinks when the
5
6
31
page 29).
Press VCR MENU. Select the
"TIMER REC SET" option , then
press ENTER.
Press SET + or – to select one of the
program line, then press ENTER.
Press SET + or – to select the date,
then press ENTER.
Set the start time, end time, channel
and tape speed as in step 3.
NOTES:
• Press CANCEL to move cursor backward
for correction.
To record from external source set the
•
channel to "L". "L" will appear next to CH
125 (or 69).
To enter other programs, repeat step
2 through 4.
• To return to the normal screen,
press VCR MENU twice.
Press TIMER REC. The clock symbol(
display and the VCR stands by for recording. At the same
time, VCR mode will change to DVD mode automatically. You
can use DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
• If the clock symbol( ) does not appear on the display in spite
of the pressing of TIMER REC, the cassette may not have been
loaded yet. (see page 24)
• If the cassette is ejected in spite of the pressing of TIMER REC,
the erase prevention tab of the cassette may have been
removed. (see page 24)
8/29/02, 11:00 AM

Timer recording

MENU
TIMER REC SET
AUTO REPEAT ON
SAP ON
CH SET UP
SYSTEM SET UP
+/—/ENTER/MENU
DATE START END
+/—/ENTER/CANCEL/MENU
DATE START END
26(SU)
+/—/ENTER/CANCEL/MENU
DATE START END
26(SU) 11:00 11:30
PM PM
+/—/ENTER/CANCEL/MENU
DATE START END
26(SU) 11:00 11:30
PM PM
+/—/ENTER/CANCEL/MENU
) will appear on the
OFF
OFF
CH
—
CH
CH
125
SLP
CH
125
SLP
31