CONNECTING THE UNIT TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS (FOR DVD AND VCR)
CONNECTING THE UNIT TO A TV USING THE S-VIDEO OUTPUT JACK (FOR DVD ONLY)
NOTES:
•
If your TV has a Component input, connect the player with the Component cable as described on the following page for
best results.
•
Set the TV's TV/VIDEO button or switch to the VIDEO setting.
•
When connecting, refer to the owner's manual of the TV, as well as this manual.
•
When connecting, make sure the power is off and both units are unplugged before making any connections.
•
If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local electronics supply store.
•
Set the VIDEO OUT Option (on the GENERAL Menu Page) to S-VIDEO if using the S-Video Out jack.
•
If using a TV with a blue screen option, turn the option off on the TV for best results.
•
The S-VIDEO output jack connection can only be used for DVD playback, not for VCR mode.
CONNECTION TO OUTPUT DVD
10
If your TV has separate AUDIO IN
jacks for Composite Video and S-
Video Inputs, connect to these jacks.
If your TV has one set of AUDIO IN
jacks for Composite Video and S-
Video Inputs, connect to these jacks.