Playback Procedure - Memorex MVD4540 Owner's Manual

OPEN/
POWER EJECT CLOSE
1 2 3
4 5 6
7 8 9
CH
TRACKING/
SET
—
SELECT/
ENTER
CH
SET UP/ CLEAR/
DVD MENU
VCR MENU CANCEL
ZOOM
TITLE
AUDIO/ MEMORY/ ANGLE/
AUDIO SELECT ZERO RETURN COUNTER RESET
SUB TITLE/ PLAY MODE/
TIMER REC
ATR
PLAY
REW/SEARCH
INDEX/SKIP STOP
REC/OTR SLOW
NOTES:
• If a non-compatible disc is loaded, "Please Check Disc", "Disc playback unauthorized Consult owners manual
for further information" or "Parental Lock" will appear on the TV screen according to the type of loaded disc. In
this case, check your disc again (See pages 35 and 45).
• Some discs may take a minute or so to start playback.
• A "Prohibition" symbol
tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate
a problem with the DVD/VCR.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE,
" " will appear and remain on the screen for approx. 40 seconds and then it will change to "Please Check Disc".
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays
DVDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
• When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs. To avoid
possible damage to the audio system, the consumer should take proper precautions when the analog stereo
outputs of the DVD/VCR are connected to an amplification system.
2A77001AE(34-39)
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
VCR/DVD
1
DISPLAY/CALL
INPUT SELECT
2
0
TRACKING/
SET
+
3
RETURN
REPEAT A-B
CLOCK/
COUNTER
TV/VCR
SPEED
SEARCH/F.FWD
4
SKIP/INDEX
PAUSE/STILL
5
may appear at the upper right of the screen. This symbol means either the feature you
37

Playback procedure

Press OPEN/CLOSE.
The disc tray will open.
Place a disc onto the tray.
Hold the disc, position it with the
printed label side up, align it with
the guides, and place it in its
proper position.
Press PLAY or OPEN/CLOSE.
The disc tray closes automati-
cally.
On the screen, changes to
" " and then playback will
commence.
• A menu screen may appear on
the TV screen, if the disc has
a menu feature. In this case,
press , , ,
ENTER to operate a menu
feature.
Press STOP to end playback.
• The DVD/VCR memorizes the stopped point, depending on
the disc. "To Return To The Last Scene Viewed, Press Play.
To Disable This Operation, Press STOP Again." appears on
the screen for approx. 4 seconds. " " will continue blinking
in the display until the playback is stopped completely. Press
PLAY to resume playback (from the scene point).
• If you press STOP again ("
unload the disc, the DVD/VCR will clear the stopped point.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.
8/29/02, 10:55 AM
or
" appears on the screen) or
37