Table of Contents
Advertisement
3.5
SSE 430
Electrical connection
3.6
Fitting the brush
32
1. Move „cleaning agent
supply" and „suction unit"
switches to OFF.
2. Pull loop of extension cable
1
(20m) through ring and
attach to strain relief (1).
3. Insert machine plug into plug
2
socket (2).
4. Connect mains plug to
mains socket, ensuring that
voltage indicated on rating
plate of machine matches
mains voltage.
1. Place brush on floor in
working position.
2. Tilt machine to rear and
drive over brush.
3. Move machine backwards
and forwards slightly until
brush is audibly centred.
4. Press release switch (1) and
briefly operate hand switch
(2).
5. Brush drive rotates.
1
6. Brush engages audibly.
7. Release hand switch. Brush
2
motor switches off.
Hide quick links:
Advertisement
Table of Contents
