Intended use Using your appliance Be sure that the appliance is switched off when plugging in. Your Black & Decker Strimmer has been designed for trimming ® Stay alert. Watch what you are doing. Use common sense. and finishing lawn edges and to cut grass in confined spaces. ...
Page 5
Never attempt to remove or replace any parts other than Keep hands and feet away from the cutting line at all those specified in this manual. times, especially when switching on the motor. Warning! The cutting elements continue to rotate after the ...
Page 6
Adjusting the height of the tool (fig. C) For wired in cable units: Make sure the cable is looped through the cable restraint prior to connecting the plug to This tool has a telescopic mechanism, allowing you to set it to the mains outlet.
Warning! Only use the appropriate type of Black & Decker Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard. cutting line. Ensure that cutting line is present in both sections of the spool (fig. K). Fitting a new spool of cutting line (fig.
EC declaration of conformity Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not GL651/GL652/GL653/GL655/GL656 dispose of it with household waste. Make this product Black & Decker declares that these products conform to: available for separate collection.
Page 9
To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual.