Table of Contents
Advertisement
English
You may remove a selection from the Program Play list during the review
procedure using the CLEAR button, as described below.
I
CLEAR Button
(Remote Only)
This button allows you to remove a track selection from the memorized
program play list during the review procedure described above. Follow
the review procedure until the desired track number appears. Then,
instead of pressing the REVIEW button to continue, remove the track by
pressing the CLEAR button while the track number is displayed. You may
then continue the review procedure.
Q
RANDOM Button 4
This instructs the CD player to play tracks from the entire disc in random
order. Once all of the selections have been played once, the disc will
stop playing, unless the REPEAT Button (see below) has been engaged,
in which case the random play will continue until the STOP button is
pressed. When the RANDOM button is engaged, the
in the Display.
B
REPEAT Button 9
This button allows you to repeat the current track or the entire disc
continuously until the feature is cancelled by disengaging the REPEAT
button or pressing STOP. The REPEAT button steps sequentially through the
available options. Press the button once and the RCD-1570 will repeat
just the current track. The
icon appears in the Display. Press the button
a second time and the RCD-1570 will repeat the entire disc. A second
icon appears in the Display. Press the button a third time to cancel
the REPEAT function.
As noted above, REPEAT can be used in conjunction with the RANDOM
play feature. The REPEAT and RANDOM play combination can also be
used when playing CD-DA discs.
Note: The REPEAT function is automatically cancelled when the disc
is ejected
C
SCAN Button 0
This feature automatically plays the first ten seconds of each track on
the disc (or the memorized program). To activate the feature, press the
SCAN button. The
icon appears in the Display. To stop scanning and
resume normal operation at the current track, press the SCAN button
qF
again or press the PLAY
The RANDOM then SCAN play combination can also be used when
playing CD-DA discs.
H
TIME Button -
Normally, the RCD-1570 displays the elapsed time of the currently
playing track. The TIME button allows you to see alternative time displays.
Pressing the button once displays the time remaining in the current track,
which counts down as the track continues playing. Pressing the button a
second time displays the time remaining on the entire disc (or memorized
program). When the alternative time displays are selected an „ ‰ icon
appears in the display. Pressing the button a third time reverts to the
standard elapsed time display.
Note: When playing MP3 and WMA discs, only the regular elapsed
time and the time remaining in the current track can be displayed.
icon appears
button.
Rotel-Link o
This 3.5 mm stereo mini-jack (labeled ROTEL LINK IN) receives command
codes from another Rotel-Link OUT enabled unit in the Rotel series of
products. Allowing a set of products to operate as one using the ROTEL
remote application.
Remote Control Advanced Buttons
P
SETUP Button
(Remote Only)
By pressing the SETUP button, you can enter the following setup menu
1. DIMMER- changes the display brightness in 7 steps.
2. VERSION - Displays the current software version.
3. EXIT - Exits this SETUP menu.
From the remote control, press the STOP/PAUSE/TRACK+/- keys to
change the contents of the menu, press PLAY to enter the setting or confirm.
Note: You can also access the SETUP menu without the remote control.
Press the STOP key on the front panel for 5 seconds. Press the TRACK
buttons to change the contents of the menu and press STOP to enter the
settings or confirm.
L
DIM Button
(Remote Only)
Press the DIM key sequentially to change the DISPLAY brightness. This
the same as the DIMMER function under the SETUP menu.
11
Advertisement
Chapters
Table of Contents
