Connecting The Live-View Remote To One - Sony HDR-AZ1 How To Use Manual

[20] How to Use
(Single Connection)
Connecting the Live-View Remote to One Camera
You can easily operate all the functions of the camera by connecting one camera to the
remote control through Wi-Fi.
1. Turn on the power of the camera
2. Press the Wi-Fi button of the camera to set the setting of the camera to
(Single connection)
3. Turn on the remote control
4. The Wi-Fi device selection screen is displayed on the LCD screen of the remote
control. Select the SSID of the camera you want to connect with the UP button or
DOWN button and press the REC/ENTER button.
Check that Wi-Fi of the camera is set to the single connection when SSID is not
displayed.
SSID is indicated on the sticker attached to the back side of the battery pack cover
of the camera.
5. Press and hold the Wi-Fi button of the camera when you hear the camera beep
The camera and remote control enter the waiting state for Wi-Fi certification. When
you hear a beep sound at a long interval, press and hold the Wi-Fi button. The beep
sounds at a short interval, and then connection is completed.
The display on the LCD screen of the remote control switches to the Live-View
display and the REC/Wi-Fi lamp of the remote control lights up in blue.
Getting Started Connecting the Live-View Remote to the Camera