Attaching The Belt To The Live-View - Sony HDR-AZ1 How To Use Manual

[14] How to Use
Attaching the Belt to the Live-View Remote
Attach the belt to the remote control.
1. Place the remote control on the base plate and thread the belt through the belt loop of
the remote control and the base plate as illustrated in
illustrated in
You can adjust the belt length depending on the pasting position of
2. To fasten the remote control to your arm, wear the remote control with the LCD screen
parallel to the back of your hand and the REC/ENTER button facing toward your
fingertips. Thread the belt through
After attaching
Note
Attaching the belt incorrectly may cause injury.
The GPS antenna is built in the front of the remote control. Placing the remote control
upside down may cause positioning to take long time or may not be able to determine
your position.
Getting Started
.
, move to cover the end of
Preparing the Live-View Remote
as illustrated on the left below
.
, and then attach it as
and .