Monitor - Sony HDR-AZ1 How To Use Manual

Time code/user bit setting
IR-remote controller: Sets the infrared remote controller RMT-845 (sold
separately).
Switching NTSC/PAL: Selects a setting, depending on the TV system of the
country or region where you use this camera.
Auto power off: Sets the power of the camera to turn off automatically.
Beep: Sets the Beep to ON/OFF.
Format
card to its initial state.
The setting items of the remote control
Remote control settings
Screen rotation: Changes the directions of LCD monitor and UP button/DOWN
button of the remote control.
Monitor brightness: Sets LCD monitor brightness of the remote control.
Date & time setting: Sets the year/month/day and region.
Reset settings: Resets each setting value of the remote control to default setting value.
Version: Displays the software version of the remote control.
Connection mode
control.
GPS setting
while recording photos using GPS of the Live-View Remote.
Airplane mode
function and GPS function temporarily when you are in an airplane.
Reset network settings
*1
Not displayed when the camera and remote control are connected through Wi-Fi.
*2
Displayed only in the single connection.
*3
Displayed when a memory card is inserted.
*4
Displayed only when set to the movie mode.
*5
Not displayed when the airplane mode is set to ON.
*6
Displayed only for the multi connection.
Note
The setting items of the camera are displayed only when the camera and remote control
are connected through Wi-Fi (excluding the remote control settings).
The icons displayed in the default settings are listed.
To return to the setting item selection screen from the setting value selection screen,
select .
To perform the setting item in the selection screen or the setting value, select
*4
: You can select the time code/user bit function setting.
*3
: Deletes all images in the memory card and restores the memory
*1, *5
: Sets the number of cameras connected to the remote
*5
: Records GPS log while recording movies and the location information
*1
: Sets the camera to disable all functions related to the Wi-Fi
*6
: Resets network settings for the multi connection.
.