Oven Racks - Haier HCW2360AES User Manual

24” built-in oven
Hide thumbs Also See for HCW2360AES:
Table of Contents

Advertisement

OVEN RACKS

The oven has rack guides at four levels as shown in the
illustration.
Rack positions are numbered from the bottom rack guide
(#1) to the top (#4).
Check Cooking Charts for best rack positions to use
when cooking.
Each level guide consists of paired supports formed in the
walls on each side of the oven cavity.
Always be sure to position the oven racks before turning
on the oven. Make sure that the racks are level once they
are in position.
Please refer to illustration on "Features of Your Oven" if there is any question as to
which side is the front or top of the rack.
The racks are designed to stop when pulled forward to their limit.
IMPORTANT: Never use aluminum foil to cover the oven racks or to line the oven. It
can cause damage to the oven liner if heat is trapped under the foil.
IMPORTANT: Make sure you do not force it to avoid damage to the enamel.
To remove oven rack from the oven:
1. Pull rack forward.
2. Lift rack up at front and then remove it.
To replace an oven rack:
1. Place rear of rack between rack level guides
4
3
2
1
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcw225laesHcw225raes

Table of Contents