Limited Warranty - Pandigital PANTV1512 Kitchen Technology Center User Manual

Q: Why are the DPF screens displaying very large and sometimes part of the screen is cut off?
A: Check your Aspect Ratio setting in the TV option of the On Screen Display (OSD) menu. Be sure the Aspect
Ratio is set as Normal for proper DPF viewing. (Refer to Aspect Ratio on page 27 for more information.)
Q: I have a memory card in the KTC; why can't I view my photos?
A: Check to be sure that your memory card is one of the KTC's supported formats, and that the files on the card
are JPEG image files.
Check to be sure that the memory card is inserted all the way into the card slot and is facing the right
direction.
Follow the instructions for starting the KTC in DPF mode again. If the photos on your card still do not display,
you may want to try another card.
Note: Some digital cameras save images in other formats. Refer to your camera's user guide if your
photos are not JPEG files.
Q: Why is the picture display slower with some pictures and faster with others?
A: Higher resolution pictures load more slowly. Try using lower resolution pictures or down sampling your
images. Refer to your camera's user guide for details on down sampling your photos.
Q: Can I insert multiple memory cards?
A: Yes. Turn off the unit before inserting any card. The Select Card menu lets you choose between all available
memory cards and built-in memory.
Q: Does the KTC have built-in memory?
A: Yes. It has built-in memory; the memory size depends on your model.
Q: Does the KTC support all JPEG and Motion JPEG files?
A: No, it supports JPEG and Motion JPEG files taken from a digital camera. The KTC may not read all image
files downloaded from the Internet or from other software graphic applications.

Limited Warranty

The limited warranty set forth below is given by Pandigital with respect to Pandigital brand electronics products
purchased and used in the United States of America. Pandigital warrants this product against defects in material
or workmanship as follows:
LABOR: For a period of one (1) year from the date of purchase, if this product is found to be defective, Pandigital
will repair or replace the product, at its option, at no charge. After this one (1) year, labor charges will be charged
on a case by case basis.
PARTS: For a period of one (1) year from the date of purchase, if this product is found to be defective, Pandigital
will supply at no cost, new or rebuilt replacement parts, at its option, at no charge. After this one (1) year period,
parts will be charged for on a case by case basis. Modifications not approved by the party responsible for
compliance could void user's authority to operate the equipment.
This warranty does not cover: (1) customer instruction, installation or setup; (2) cosmetic damage or damage due
to accident, misuse, abuse or negligence; (3) commercial use of the product; (4) modification of any part of the
product; (5) damage due to improper operation, improper maintenance, or connection to an improper power
supply; (6) loss of data, regardless of value or format, that may result through proper and/or improper use of the
product; (7) damage due to an attempted repair of the product by anyone other than a facility authorized by
Pandigital to service the product; (8) consumables (such as fuses and batteries). This warranty is valid only in the
United States.
The product must be accompanied by a copy of the original retail purchase receipt. If no proof of purchase is
63