Rotate A Photo; Zoom A Photo; Photo Date/Time Stamp; Enable Clock Display - Pandigital PANTV1512 Kitchen Technology Center User Manual

Rotate a Photo

Note: You must use the KTC remote control for this feature.
1. With a photo individually displayed, rotate it by pressing ROTATE. The photo will be rotated by 90
degrees clockwise with each press of the ROTATE button.
2. Press EXIT to return to the photo thumbnail screen.
3. The photo will remain rotated even after the KTC is powered off.

Zoom a Photo

1. With a photo individually displayed, magnify it by touching or pressing ZOOM. The photo is magnified in
size each time you press ZOOM, until it returns to its normal size.
2. (RC only) In zoom mode you can also pan around the photo by using ▲ / ▼ or ◄ / ► to view portions of
the photo that are not currently visible.
3. Touch BACK or press EXIT to return to return to the thumbnail screen.

Photo Date/Time Stamp

When photos are taken, most digital cameras automatically add date/time stamps the image files. If desired, you
can have the photo date and time stamps displayed with the photos.
This date/time stamp will only display if your photo files include this information. If your photos have been
obtained from sources other than directly from the digital camera, i.e., scanned photos, there will be no date/time
stamp to display.
Note: You must use the KTC remote control for this feature.
1. While a slideshow is playing, press SETUP.
2. Use the arrows to highlight Photo Date/time Stamp, and then press ENTER.
3. Use the arrows to highlight your preference, and then press ENTER.
4. Press EXIT to close the options, and then press ENTER to resume your slideshow.

Enable Clock Display

You can have the current time displayed with your slideshows or with individual photos when desired.
Note: You must use the KTC remote control for this feature.
1. While a slideshow is playing, press SETUP.
2. Use the arrows to highlight Enable Clock Display, and then press ENTER.
3. Use the arrows to highlight your preference, and then press ENTER.
5. Press EXIT to close the options, and then press ENTER to resume your slideshow.
TIP: If your clock is not displaying the correct time, refer to the CLOCK section on page 50 for
instructions on setting the clock.
39