Back Panel Input Connectors - Pandigital PANTV1512 Kitchen Technology Center User Manual

4. Use the bundled Wall Mount Kit included with your KTC, and refer to the Installation and Assembly
instructions that are included with the Wall Mount Kit.

Back Panel Input Connectors

The following descriptions are for connections from left to right.
1. YPbPr – Connection port for DVD players, or satellite / cable set-top boxes that use component cables.
From right to left, connect green, blue, and red for video, and then connect white for left channel audio,
and red for right channel audio.
2. TV – Connection for digital or analog cable without the cable box or over-the-airwave antennas. The tuner
is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable.
For over-the airwave digital stations, check the following website: http://www.antennaweb.org.
3. AV – Composite connects to devices that use composite video cables such as VCR or camcorder or
video game consoles. The S-Video connector is associated with AV's video. Connect the video portion
with either the yellow connector or the S-Video connector. Do NOT connect both video connectors at the
same time, because the audio connection is shared.
4. VGA - Connection port connects to a PC for video using VGA cable. Connect your audio cable to the
VGA Stereo input if you want sound out of the VGA video source.
5. VGA STEREO INPUT - Connection port if you want to provide audio to the TV when using a PC. The
sources use 3.5mm mini-jack audio cable to provide audio for PCs with VGA connection.
6. HDMI – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable /
satellite set-top box. This connection port receives pure digital audio and high definition signal through
one single cable. This port also can accept a HDCP video device for video.
7. DC - Connection for providing electricity to the KTC; connects to the AC power adapter which connects to
the AC power source. (It is important to use only the AC adapter included with the KTC.)
Note: The KTC features a power saving function which automatically turns the TV off when idle on a
connection with no signal for approximately 3 minutes, and then automatically plays the photo
slideshow. This feature is present on all connections.
12