Quickie Salsa Instructions For Use Manual page 67

Model: Quickie Salsa M (MWD)
Maximum occupant mass
(test dummy mass): 140 kg
The wheelchair Quickie
Salsa conforms to the
following standards:
a) requirements and test
methods for static, impact
and fatigue strengths
(ISO 7176-8)
b) power and control systems
for electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in accordance
with ISO 7176-9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is specified as
a Class B power chair
ISO7176-15
Overall length (with legrest)
Overall width
Total mass (w. batteries)
Mass of the heaviest part
Static stability downhill
Static stability uphill
Static stability sideways
Energy consumption (max. range)
Dynamic stability uphill
Obstacle climbing (with kerb climber)
Max. speed forward
Min. brake distance from max. speed
Seat plane angle
Effective seat depth
Effective seat width
Seat surface height at front edge
Backrest angle
Backrest height
Footrest to seat distance
Leg to seat surface angle
Armrest to seat distance
Front location of armrest structure
Min. turning radius
Nominal battery voltage
Battery cut-off voltage
Battery fusible links
Quickie Direct Actuator Control Box
fusible link
Mass of the test dummy
EN 12184
Max. kerb height
Ground clearance
Turning diameter
Speed control operation force
Direction control operation force
Min. Max.
- 1150 mm
600 mm 660 mm
113 kg 145 kg
- 98 kg
- 17°
- 9.5°
- 13.9°
- 26 km
8 °
75 mm
6 kph 10 kph
1.0 m 1.2 m
-5° 30°
406 mm 508 mm
394 mm 496 mm
470 mm -
-4° 16°
400 mm 500 mm
335 mm 610 mm
110° -
245 mm -
310 mm 420 mm
670 mm -
- 24V
- 16V
- -
- -
- 137 kg
Min. Max.
- 75 mm
- 40 mm
1000 mm 1150 mm
- 2.2N R-Net
2.4N VR2
- 1.7N R-Net
1.9N VR2
Comments
with 70° hanger
max. width with seat width ad-
justed to 51 cm
Chair with all no tool removal
parts taken off
worst case 41 cm deep seat, 0°
tilt, -4° recline
worst case 51 cm deep seat, 29°
tilt, 16° recline
worst case 41 cm deep seat, 0°
tilt, 0° recline
9° tilt/16° recline &max. seat
height (not with balle)
Forward with 6 kph motors
10 kph only with 10 kph motor
option
1 m for 6 kph motor, 1.2 m for 10
kph motor
-5° only with MBL tilt + additional
brackets
set 0° tilt, lowest seat height and
no modules
adjustable in 4° steps with tools
with 70° hanger
with 70° hanger
adjustable with tools
with 70° hanger
for 255 seconds
150A in line fuse on each battery
15A blade fuse located on AUX
supply of power loom
Comments
SALSA M
67