Quickie Salsa Instructions For Use Manual page 62

SALSA M
Parts in the battery box, (Fig.12.22):
• Plastic battery box cover for 2 x 12V batteries.
• 2 x battery looms with fuse and ring terminals.
• Battery link harness with red and grey connectors.
Accessing the Batteries
• Locate & loosen the 2 hand wheels at the front of the
power base, (Fig.12.23).
• Pull the spring loaded catch, (Fig.12.24).
• Carefully tilt the seat back, (Fig.12.25).
• Support the seat with the seat stay, (Fig.12.25).
• Ensure the plastic cap, clips over the end to secure
the seat.
• The Battery Cover is secured by 6 plastic rivets. Use a
flat blade screw driver to lift out the rivets.
• Lift the Battery Cover clear.
• Disconnect the GREY plug on the front battery.
• Lift the front battery out using the lifting straps pro-
vided.
• Disconnect the GREY plug on the rear battery,
(Fig.12.26).
• Lift the rear battery out using the lifting straps pro-
vided, (Fig.12.27).
• Peel back 1 cover and using 2 x 13.0mm spanners,
undo & remove the terminal bolt. Repeat for the other
terminal/battery, (Fig.12.28).
• On refitting, the battery terminals must be covered
after connection with the caps provided on the cable,
(Fig.12.29).
Fig.12.23
Fig.12.24
62
SALSA M
Fig.12.25
Fig.12.26
Fig.12.27
Fig.12.28
Fig.12.29