Important Information - Hunter Ceiling Fans Installation And Operation Manual

IMpOrtant InFOrMatIOn

CautioNs
• Read entire booklet care-
fully before beginning in-
stallation and save these
instructions.
• To reduce the risk of per-
sonal injury, attach the
fan directly to the support
structure of the building
according to these instruc-
tions, and use only the
hardware supplied.
WarNiNgs
• To avoid possible electri-
cal shock, before installing
your fan, disconnect the
power by turning off the
circuit breakers to the out-
let box and associated wall
switch location. If you can-
44204-01 5/30/2007
not lock the circuit break-
ers in the off position, se-
curely fasten a prominent
warning device, such as a
tag, to the service panel.
• All wiring must be in accor-
dance with national and lo-
cal electrical codes. If you
are unfamiliar with wiring,
you should use a qualified
electrician.
• To reduce the risk of per-
sonal injury, do not bend
the blade attachment sys-
tem when installing, bal-
ancing, or cleaning the
fan. Never insert foreign
objects between rotating
fan blades.
• The fan blades cannot be
placed lower than 2,3m
from the floor.
Do You NeeD Help?
To install a ceiling fan, be sure you
can do the following:
• Locate ceiling joist or other
suitable support in ceiling.
• Identify and connect electrical
wires.
• Lift 16 kg.
If you need help installing the fan,
your Hunter fan dealer can direct
you to a licensed installer or elec-
trician.