Step 1 - Getting Ready - Hunter Ceiling Fans Installation And Operation Manual

step 1 - gettIng ready

gatHeriNg tHe tools
You need the following tools to in-
stall the fan:
• Standard screwdriver
• Phillips-head screwdriver
• Wrench or pliers
prepariNg tHe FaN site
Reliable operation, efficiency, and
maximum energy savings depend
upon proper placement and attach-
ment of the fan. This fan should be
installed on a previously installed
J-Hook or U-Hook.

CHeCkiNg Your FaN parts
Carefully unpack your fan parts to
avoid damage. Check for shipping
damage. If one of the fan blades
is damaged, return all blades for
replacement.
Hint: If installing more than one fan,
keep the fan blades in sets, as
shipped.
Standard Mounting (Figure 1) hangs
from the ceiling by a connector
pipe (included), for ceilings 2.3 m
or higher. For ceilings higher than
2.3 m.
Figure 1 - Standard Mounting
44204-01 05/30/2007