Important Information; Step 1 - Getting Ready - Hunter Installer's Choice Installation And Operation Manual

IMPORTANT
INFORMATION
CAUTIONS
• Read entire booklet carefully before begin-
ning installation and save these instructions.
• To reduce the risk of personal injury, attach
the fan directly to the support structure of
the building according to these instructions,
and use only the hardware supplied.
WARNINGS
• To avoid possible electrical shock, before in-
stalling your fan, disconnect the power by
turning off the circuit breakers to the outlet
box and associated wall switch location. If you
cannot lock the circuit breakers in the off po-
sition, securely fasten a prominent warning
device, such as a tag, to the service panel.
• All wiring must be in accordance with national
and local electrical codes and ANSI/NFPA 70.
If you are unfamiliar with wiring, you should
use a qualified electrician.
• To reduce the risk of personal injury, do not
bend the blade attachment system when in-
stalling, balancing, or cleaning the fan. Never
insert foreign objects between rotating fan
blades.
• To reduce the risk of fire, electrical shock, or
motor damage, do not use a solid-state speed
control with this fan.
DO YOU NEED HELP?
To install a ceiling fan, be sure you can do the following:
• Locate ceiling joist or other suitable support in ceil-
ing.
• Drill holes for and install wood screws.
• Identify and connect electrical wires.
• Lift 40 pounds.
If you need help installing the fan, your fan dealer can
direct you to a licensed installer or electrician.
2
handy for identifying parts during installation; the dia

STEP 1 - GETTING READY

GATHERING THE TOOLS
You will need the following tools for installing the fan:
• Electric drill with 9/64" bit
• Standard screwdriver
• Phillips-head screwdriver
• Wrench or pliers
PREPARING THE FAN SITE
These guidelines are designed to help you select the best
location for your fan and to prepare the site prior to
installing the fan. Proper ceiling fan location and attach-
ment to the building structure are essential for safety,
reliable operation, maximum efficiency, and energy sav-
ings.
CAUTIONS
• Read this entire guide and the manufacturer's instal-
lation instructions carefully before beginning.
• To reduce the risk of personal injury, attach the fan
directly to the support structure of the building ac-
cording to these guidelines, and use only the hard-
ware supplied with the fan.
• The fan mounting must be able to support the full
weight of the fan and light kit.
WARNINGS
• To avoid possible electrical shock, before inspecting
and preparing the site, disconnect the power by turn-
ing off the circuit breakers to the outlet box or lead
cables and associated wall switch location. If you can-
not lock the circuit breakers in the off position, se-
curely fasten a prominent warning device, such as a
tag, to the service panel.
• All wiring must be in accordance with national and
local electrical codes and ANSI/NFPA 70-1993. Any-
one who is unfamiliar with wiring should contact a
qualified electrician.
41473-01 12/6/2001