Advertisement
HP-EZ series
Cover Plate
Screws (4)
Hanging Bracket
Terminal
Block
Speaker
Warning
Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Install Instructions For:
HP82-EZ-WH & HP82-EZ-BK
Hanging Hardware
Weather plug
Cover Plate
Tap Switch
1.435.647.9555
© 2015 SoundTube Entertainment, Inc. All rights reserved. INS-HP-EZ Rev 12.04.2014 - Rev 2
Document Reference Number RSEZ0003
Warning
Warning
Do not spec or install speaker near support beam, ventilation duct or
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
other structure that may interfere with speaker function or dispersion.
Box contents
1 Speaker
1 Cover Plate w/ 4 screws
1 Rubber weather plug
1 Hanging kit
|
|
800.647.TUBE
www.soundtube.com
Advertisement
Table of Contents
Related Manuals for SoundTube HP82-EZ-WH
Summary of Contents for SoundTube HP82-EZ-WH
- Page 1 Terminal Block Speaker 1.435.647.9555 800.647.TUBE www.soundtube.com © 2015 SoundTube Entertainment, Inc. All rights reserved. INS-HP-EZ Rev 12.04.2014 - Rev 2 Document Reference Number RSEZ0003 Warning Warning Warning Warning SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for Do not spec or install speaker near support beam, ventilation duct or SoundTube speakers must be installed by a professional audio installer/contractor.
- Page 2 HP-EZ series Install Instructions For: 1.435.647.9555 800.647.TUBE www.soundtube.com HP82-EZ-WH & HP82-EZ-BK Unpack speaker and Thread hanging or safety Attach the hanging cable Thread cable end(s) SpeedClamp™ mounting cable through SpeedClamp™ by securing it and safety through SpeedClamp™ hardware. mechanisms as shown.
- Page 3 HP-EZ series Install Instructions For: 1.435.647.9555 800.647.TUBE www.soundtube.com HP82-EZ-WH & HP82-EZ-BK Conduit Installation: Note: Conduit is not an approved mounting method for UL1480 installations 4. Run signal wire and at Unpack speaker from 2. Securely mount conduit 3. Thread cover plate on to least one safety cable box.
- Page 4 EN54-24 Install Instructions For EN54-24 Compliance In order for this speaker to be EN54-24 compliant, a 3/8" NPT wire gland and a 3/4" to 3/8" NPT adapter have been included with the product. These items must be installed according to this document to be EN54-24 compliant. 3/8"...
Need help?
Do you have a question about the HP82-EZ-WH and is the answer not in the manual?
Questions and answers