Sub-Zero UC-15I Service Manual page 16

Installation Information
13. Prepare sanitizer solution and sanitize the ice
machine according to In Place Cleaning/Sanitizing
instructions found in the Installation & Operation
manual.
14. Put one gallon (4 L) of cold water into a container
that will easily pour under the lifted water shutters.
Refer to page 17 to identify water shutters. Open
shutters and add one gallon (4 L) of cold water.
Watch for proper drainage.
15. Press POWER button.
16. At initial start-up, ice machine will need approxi-
mately 30 minutes to freeze ice and up to 5 minutes
to harvest the ice. Wait for first cycle of cubes to
drop to ensure proper installation.
I N S TA L L AT I O N S P E C I F I C AT I O N S
Gravity Drain Model
OPENING WIDTH
DRAIN
TUBE
FRONT VIEW
#7012423 - Revision A - August, 2009
Model UC-15I (Undercounter Ice Machine)
DRAIN SHUT-OFF
DRAIN WATER VALVE
TUBE INLET
TUBE
1
/ "
8 (3)
1
15 / "
4 min
(387)
TOP VIEW
WATER
INLET TUBE SHUT-OFF
VALVE
Dimensions in parentheses are in millimeters unless otherwise specified.
Do NOT cover the kickplate area
The unit must be allowed to have ventilation through
these fins. The door panel may hang in front of the
fins, but a decorative kickplate must not cover the fins.
It is possible to paint the kickplate another color. Follow
these easy steps:
• Rough up surface to be painted with fine grit sandpa-
per.
• Wipe with alcohol to ensure it is clean and dry.
• Use an appliance or industrial grade, oil base, high
gloss enamel paint.
I N S TA L L AT I O N S P E C I F I C AT I O N S
Drain Pump Model
SHUT-OFF
VALVE
SHUT-OFF
VALVE
2-8
WATER
INLET TUBE
DRAIN TUBE
AIR GAP
DEVICE
1
/ "
8 (3)
1
15 / "
4 min
(387)
OPENING WIDTH
TOP VIEW
AIR GAP
DEVICE
DRAIN TUBE
WATER
INLET TUBE
FRONT VIEW