Hard Ceiling Mount - GeoVision GV-FE110 User Manual

1.6.1 Hard Ceiling Mount

1. Place the installation sticker on the ceiling board. The 3 red dots indicate the location of
the screws.
Figure 1-4
2. At the 3 red dots, drill a hole slightly smaller than the plastic screw anchors provided.
3. Insert the 3 plastic screw anchors in the drilled holes.
4. Secure the fisheye camera with the 3 hard ceiling mount screws provided.
Figure 1-5
5. Place the camera cover for hard ceiling mount on top of the camera and tighten the
screws with the torx wrench provided.
Figure 1-6
10