Installation; Hard Ceiling Mount - GeoVision GV-Fisheye SERIES Quick Start Manual

2. Installation

2.1 Hard Ceiling Mount

Without IR LED Ring
Note: To connect wires, cables and the IR LED ring, see 3. Connecting the Camera in the
Quick Start Guide.
1. Place the installation sticker on the ceiling board. The 3 red dots indicate the location of
the screws. To install GV-Fisheye Camera with PoE converter (GV-FE2303 / 3403 / 4303 /
5303), drill the 3 holes and the rectangle block indicated as "PoE Converter"; to install
GV-Fisheye Camera only with the IR LED ring (GV-FE2303 / 3403 / 4303 / 5303 and
GV-FER3403 / 5303), drill the 3 holes indicated as "Device" and the circle indicated as
"IR".
2. At the 3 red dots, drill a hole slightly smaller than the plastic screw anchors provided.
With IR LED Ring
11