Function Select－System Info - Projectek Networking Electronics BESTip ATA GSM User Manual

8. After finishing all the settings, please press "UP" button one or two
times until the screen displays "Update Setup" as following picture. All
the setting will be saved permanently.
9. It will return to standby status automatically after the configuration
data has been saved. Please refer to the following chapters to setup
your BESTip ATA GSM.
BESTip ATA GSM User Manual
Press "UP" button 1 or 2
times until the screen
displays "Update Setup".
17
BESTip ATA GSM User Manual
Function Select－System Info
You can always get the system information for your BESTip
from the System Info menu.
1. Press button to enter the
Function Select Mode. Press
button to enter System Info.
2. Device ID: Each BESTip device
has an unique 8 digit ID#. It is the
number for other BESTip users to
reach you over Internet. So, you need
to inform all of your friends or group
who use BESTip products the 8-digit
ID# to call you over BESTip.
3. ITSP Credit: It will display the
balance in your device account.
4. Software Version:It will display the
current software version of your
BESTip.
5. LAN MAC Address: It will display
the physical internet address which
your BESTip is conntected.
6. My IP Address: It will display the
IP address assigned to your BESTip.
7. NETMASK Address: It will display
the Netmask IP address.
18