How To Make Calls Through Bestip Ata Gsm - Projectek Networking Electronics BESTip ATA GSM User Manual

Table of Contents

Advertisement

2. Once the system testing finishes,
the screen will display the local time
according to the country code you set
and Blue LED On-Line signal will be
on.
3. You can press
to see the
balance and the message "Ready for
Dial" will be shown on the display as
well.
Note: The LCD screen will show the current time of your
country according to the country code pre-configured. If the time
displayed is counted from 00:00:00, it means your BESTip is
not successfully registered to the Gatekeeper and your network
connection or configuration might be incorrect. Please refer to
"Chapter 3: Setup" in this manual for network configuration.
If you see the DNS Lookup Fail flashing, it means your BESTip
has not successfully connected to the Internet. Please also refer
to "Chapter 3: Setup" in this manual to configure your network.

How To Make Calls Through BESTip ATA GSM

1. Please follow the dialing sequence below for calling any real
phone number through ATA-GSM from the other BESTip
device.
[ATA GSM device ID#] + * + [Phone Number] #
Suppose your ATA-GSM device ID# is 69000123#, so
someone can dial from his BESTip device by dialing
"69000123
12345678#" to ring someone's mobile phone.
BESTip ATA GSM User Manual
35
BESTip ATA GSM User Manual
2. With Internet Telephony Service Provider (ITSP) service
function ready, BESTip is able to call any real telephone around
the world. You need to have an active ITSP account to make
BESTip-to-Phone call. Please contact our local distributor to
recharge your device account.
Suppose you want to call to other BESTip device or
international number through your ATA-GSM.
2.1 Please call the SIM card number you put in your ATA-GSM
device by using land line or mobile phone.
2.2 The ATA-GSM device will answer the call and give dial tone
(if you don't set up the inward passwords). Then, you can dial
the other BESTip ID number or international number.
For Other BESTip Device
Dial the eight-digit device ID number
For Domestic Long-Distance Calls
[DDD prefix code] + [Area code + Telephone number] + #
For International Calls
[IDD prefix code] + [Country code + Area code + Telephone
number] + #
Note: Every BESTip has a unique eight-digit ID number found
at the bottom of the device.
36

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BESTip ATA GSM and is the answer not in the manual?

Table of Contents