Chapter 2: Installation; Package Contents; Requirements To Use Bestip; Physical Installation - Projectek Networking Electronics BESTip ATA GSM User Manual

Chapter 2: Installation

This chapter will describe how to connect your BESTip ATA
GSM.

Package Contents

The package of the BESTip includes the following:

A BESTip ATA GSM

A DC power adapter

A GSM SIM Card (900/1800 MHz Dual Band)

A RJ-45 network cable

An Antenna

Requirements to Use BESTip

Before making an Internet call with your BESTip, you also need
the following items:

A GSM SIM Card

An 110/220V electrical outlet

An active Internet connection (ADSL, Cable or others):
The following parameters must be known about the
network (LAN, WAN, Internet, etc.) to which the BSETip
will connect.
IP Address for BESTip
Gateway IP Address
IP Netmask
DNS (Domain Name Server)
IP Address
Note: Write down the values for these IP parameters. You may
need to enter these values in the following chapter.
BESTip ATA GSM User Manual
9
BESTip ATA GSM User Manual

Physical Installation

Follow the instructions for correct connection:
1. Connect the antenna and Insert the GSM SIM Card to the
connector on the back of BESTip ATA GSM.
2. Connect the provided network cable into the LAN port of
BESTip ATA GSM. Connect the other end of the cable to
your network eg. a router, hub or an ADSL modem.
3. Attach the DC power adapter cord into the DC 12V
connector of BESTip ATA GSM and a live power outlet.
Hookup for BESTip ATA GSM
Note: A crossover network cable may be required when connecting
to ADSL Modem.
10