Function Select－System Setting - Projectek Networking Electronics BESTip ATA GSM User Manual

8. ROUTER Adress: It will display the
Router/ Gateway IP address.
9. Primary DNS Address: It will
display the primary DNS address.
10. Secondary DNS Address: It will
display the secondary DNS address.
11. Gatekeeper Type: It will display
the gatekeeper the device is
registered.
Function Select－System Setting
You can establish your setup or modify for your BESTip from
the System Setting menu at any time.
1. Press button to enter the
Function Select Mode.
2. Press or button to
scroll the main menu till it appears
Function Select - System Setting.
And then press to enter the option.
3. There are three options in the System Setting menu: for IP
Policy – DHCP, IP Policy – Static IP and IP Policy – ADSL
PPPoE. Just choose and configure the one to which network the
BESTip is connected.
BESTip ATA GSM User Manual
19
BESTip ATA GSM User Manual
For the following setup, please consult
"Other Common Setup" in this chapter.
20