P5K64 WS IDE Connector
3.
ICH9R Serial ATA connectors (7-pin SATA1 [blue], SATA2 [blue], SATA3
[blue], SATA4 [blue], SATA5 [blue], SATA6 [blue])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0 and
RAID 1 configuration with the Intel
onboard Intel
®
•
These connectors are set to Standard IDE mode by default. In Standard
IDE mode, you can connect Serial ATA boot/data hard disk drives to these
connectors. If you intend to create a Serial ATA RAID set using these
connectors, set the Configure SATA as item in the BIOS to [RAID]. See
section 4.3.6 SATA Configuration for details.
Before creating a RAID set, refer to 5.4.2 Intel RAID Configuration or the
•
manual bundled in the motherboard support DVD.
P5K64 WS SATA Connectors
ASUS P5K64 WS
ICH9R RAID controller.
Matrix Storage Technology through the
®
SATA2
GND
RSATA_TXP2
RSATA_TXP1
RSATA_TXN2
RSATA_TXN1
GND
RSATA_RXP2
RSATA_RXP1
RSATA_RXN2
RSATA_RXN1
GND
SATA4
GND
RSATA_TXP4
RSATA_TXP3
RSATA_TXN4
RSATA_TXN3
GND
RSATA_RXP4
RSATA_RXP3
RSATA_RXN4
RSATA_RXN3
GND
SATA6
GND
RSATA_TXP6
RSATA_TXP5
RSATA_TXN6
RSATA_TXN5
GND
RSATA_RXP6
RSATA_RXP5
RSATA_RXN6
RSATA_RXN5
GND
SATA1
GND
GND
GND
SATA3
GND
GND
GND
SATA5
GND
GND
GND
2-23