Asus P5K64 WS User Manual page 142

Resetting Disks to Non-RAID
Take caution before you reset a RAID volume HDD to non-RAID. Resetting a RAID
volume HDD deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID, then press
<Enter> to display this screen.
WARNING: Resetting a disk causes all data on the disk to be lost.
Port Drive Model
[↑↓]-Previous/Next
2. Use the up/down arrow key to highlight the RAID set drive you want to reset,
then press <Space> to select.
3. Press <Enter> to reset the RAID set drive. A confirmation message appears.
4. Press <Y> to reset the drive or press <N> to return to the utility main menu.
5-38
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these structures,
the drive will revert back to a non-RAID disk.
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
Select the disks that should be reset.
[SPACE]-Selects
[ RESET RAID DATA ]
Serial # Size Status
XXXXXXXX XX.XGB Member Disk
XXXXXXXX XX.XGB Member Disk
[ENTER]-Selection Complete
Chapter 5: Software support