Parkview® Rear Back-Up Camera; Rear Cross Path With Blind Spot Monitoring; Power Sliding Side Doors - Chrysler Town & Country 2011 User Manual

PARKVIEW® REAR BACK-UP CAMERA
• You can see an on-screen image of the rear of your vehicle whenever the shift lever is put into
REVERSE. The ParkView® Rear Back-Up Camera image will be displayed on the radio display
screen, located on the center stack of the instrument panel.
Drivers must be careful when backing up even when using the ParkView® Rear Back-Up
Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians,
animals, other vehicles, obstructions, or blind spots before backing up. You must continue
to pay attention while backing up. Failure to do so can result in serious injury or death.

REAR CROSS PATH WITH BLIND SPOT MONITORING

• The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear
bumper fascia, to detect Highway licensable vehicles (automobiles, trucks, motorcycles etc.)
that enter the blind spot zones from the rear/front/side of the vehicle.
• The Blind Spot Monitoring (BSM) system warning light, located in the outside mirrors, will
illuminate if a vehicle moves into a blind spot zone.
• The BSM system can also be configured to sound an audible (chime) alert and mute the radio
to notify you of objects that have entered the detection zones.
• Refer to your owner's manual on the DVD for further details.

POWER SLIDING SIDE DOORS

Automatic/Manual Operation
• The power sliding door may be opened or closed manually or by using the buttons on the Key
Fob, overhead console switch, or rear door switch.
OPERATING YOUR VEHICLE
WARNING!
• Pulling the inside or outside power sliding
door handle will also power open the power
sliding doors.
27