Digital Watchdog VMAX480 User Manual page 42

41 | Chapter 1 : DVR User Manual
C
AUTION
It is recommended to format the HDD after finishing the firmware upgrade because the data recorded by previous
firmware may cause malfunction of DVR due to the difference in format.
It is possible to send the system firmware back to factory default. This may be useful if some of the functions do not
work properly after a firmware upgrade. It is highly recommended to check all functions and menus after a firmware
upgrade for proper layout and performance.
Click the [DISPLAY] button to set Status Display Time Out, Setup Menu Time Out, Sequence Mode Interval, PIP Interval, Spot
Monitor Interval, and Transparency.
[TRANSPARENCY] is the transparency level of the menu screen. 0% means no transparency at all.
You may hide or unhide Live or Playback Status Display by checking the box.
N
OTE
DVRs support the following video resolutions: 800x600, 1024x768, 1280x1024, 1280x720, and more.
User must set the proper resolution according to the monitor resolution.