Merge Record - Galileo Maestro II User Manual

Once you have made the general settings, to start recording just press
the Rec key.
As soon as you have finished your performance press the Stop key.
The LED of the track you have recorded turns blue, while the tracks
which are empty or have not yet recorded any events will still be red,
so the first time the STOP key is pressed during recording, the
sequencer switches to pause status.
Rec Play Stop
Press Stop again if you wish to end the recording. The display will
return to the monitor screen. To continue recording, press the Rec
key.
If you have finished recording a track (e.g. Track1) you can start
recording again by choosing an empty track (e.g. Track2) and so on.
If you press the key of the Track where you have recorded (blue LED)
twice, you will see the LED go out. This means that the track is in Mute
status, so it will not be played while you are recording another track.

Merge Record

You can also add notes to a recorded track using the "merge" mode.
To record in merge mode, press the key corresponding to the track
already recorded (blue LED) and the LED will change colour (blue+red).
Use the locator to choose the bar from which you intend to add notes,
and continue recording as before.
The merge mode cannot be used for the tracks assigned to the arranger
(Track4 e Drm/Acmp.).
Song Composer
Page 53