Table of Contents
Advertisement
LIST
A List is the option used to program and save sequences of midi files,
which may even be saved in different directories.
To program a List, press function key F7 (LIST) from the main video
page.
The display will show the following page:
The function keys acquire the following properties
F3 SELECT - F4 UNSELECT - F5 CLEAR - F6 MASK - F8 DONE
Use the CURSOR keys (UP and DOWN) to locate the cursor on the first
song you wish to place in the List: do this by pressing button F3
(SELECT).
A selection number will be displayed next to the name of the file.
This number indicates the song's position in the List.
Continue in the same way to enter all the songs required, which may
also be in different folders. To unselect a file entered in the List, simply
locate the
cursor on the song required and press F4 (UNSELECT).
When file selection is complete press F8 (DONE) to confirm the
programming or F5 (CLEAR) to abort the procedure.
On confirmation, the system will load the first song and switch to the
KARAOKE screen if the song contains lyrics.
Now press [PLAY] and the PIANO will start to play back the song.
After it, whether the song has ended or you have stopped it before the
end using the [STOP] button, the second song in the list will be loaded,
followed by the third, and so on. Hold the [STOP] button down for a
few moments to stop playback of the List completely.
Galileo
Page 40
Advertisement
Table of Contents
