Selecting The Active Unit - Galileo Maestro II User Manual

Selecting the active unit

The active unit is selected using the display's
two SIDE SELECTORS. Press the top key to
select the DISK; if a disk is in the driver, the
icon switches to reverse and the contents are
displayed (ROOT dir).
Selezione Unità
Press the bottom key to select the DISK; if a card is inserted, the icon
switches to reverse and the contents are displayed (ROOT dir).
If the memory devices are NOT present, with no floppy disk or
Smartmedia card, the relative icon does not appear and the units cannot
be activated.
SCROLLING THROUGH THE DIRECTORIES
When the cursor is on a directory (i.e. when a directory is selected),
the F1 function key assumes the OPEN function.
Locate on a directory and press the F1 function key to open the
directory; the files it contains will be displayed in the main box.
The heading of the display changes to the name of the directory now
selected, proceeded by the ( )symbol to show that there are more
directories after it.
Once the directory has been selected, function key F2 will assume the
DIR BACK function, used to return to the previous directory level.
Disk/Card
Page 29